• TMT- DYNATRAC  PRE-OWNED

Product Specification

BrandBPL
Model Name/NumberDYNATRAC Neo/ Neo BT
Operating Temperature0 to 40 Deg C
Resolution1024 x 768 pixels (minimum)
Sampling Rate1000 Samples/sec
AcquisitionSimultaneous 12 lead acquisition, 12 bits
LeadsStandard 12 leads; Acquired 8 leads; Reconstructed 4 leads (III, aVR, aVL, aVF)
Input Dynamics+/- 300mV @ 0Hz
Input Impedance>100 M ohms
Time Constant3.2 Seconds
CMRR90dB @ 50 Hz
Patient Leakage<10 Microampere
Frequency Response0.5Hz to 100Hz
ECG Analysis200 Samples/sec
ECG Display Format3 lead or 6 lead or 12 lead median (selectable)
ECG Display Speed25mm/sec or 50mm/sec (selectable)
ECG Display Sensitivity5 or 10 or 20mm/mV (selectable)
Paper SizePlain Paper A4 size
Printing Speed25 mm/sec
Printing Sensitivity10 mm/mV
Input AC Voltage Range200 V to 240 V, 50 Hz
Power Output5V DC, 2.5W
Safety SpecificationClass II devive as per IEC 60601
Battery Charging Time6 Hours (Max) only for blue-tooth device
Battery CapacityApprox. 10 tests (each 30 min duration) only for blue-tooth device
Storage Temperature-20 to 60 Deg C
Relative Humidity25 to 95 %, non-condensing

Product Description

Advanced Dynatrac Neo Software enables accurate recording and analysis of the test. This software in combination with optional HES Algorithm enables Arrhythmia analysis and motion artifact reduction in Stress ECG.

The acquisition unit is available in two options: Dynatrac Neo BT - Bluetooth enabled wireless ECG transmitter & Dynatrac Neo - A USB based ECG acquisition unit that acquires and transfers ECG data to PC through wired interface.


Features:

  • DYNATRAC Neo: USB-based ECG acquisition unit that acquires and transfers ECG data to PC through wired interface.
  • DYNATRAC Neo BT: Bluetooth enabled wireless ECG transmitter device that helps portability.
  • Advanced Windows-based stress test software enables accurate recording and motion artefacts reduction in stress ECG.
  • Treadmill protocols can either be preset or can be programmed by the user.
  • OPTIONAL: HES® HANNOVER ECG system for analysis and interpretation.

Blue-tooth Acquisition Device
  • Dimension: 170.5 mm x 106.5 mm x 22.5 mm (length x width x height)
  • Weight: < 160 gms

USB Acquisition Device
  • Dimension: 170.5 mm x 106.5 mm x 22.5 mm (length x width x height)
  • Weight: < 160 gms

Displayed Data:
  • HR, Target HR, BP, Stage Time, Test Time, Speed, Grade, METS, Protocol name,  Protocol Stage, ST-Level, ST- Slope, Leadoff information and Patient Name.

Write a review

Note: HTML is not translated!
    Bad           Good

TMT- DYNATRAC PRE-OWNED

  • ₹0Rs.