Product Details

Brand  Hamilton

Model Name/Number -C6

Patient Age Group - Paediatric, Adult and Infant

Tidal Volume - Adult: 20 to 2000 ml, Pediatric: 20 to 2000 ml, Neonatal: 2 to 300 ml

Ventilation Mode- (S)CMV, SIMV, APVcmv/(S)CMV+, APVsimv/SIMV+, PCV+, P-SIMV+, DuoPAP, APRV, SPONT, ASV INTELLiVENT-ASV, NIV, NIV-ST, nCPAP-PS, Hi Flow O2

Performance Data -Maximum Inspiratory Flow

260 L/min

Parameter

PEEP/CPAP

Adult/Ped: 0 to 50 cm H2O, Neonatal: 0 to 25 cm H2O

Control

Flow Trigger

Adult/Ped: 0.5 to 20 L/min, Neonatal: 0.1 to 5 L/min

Flow Pattern

Square, 50% decelerating, Sine, 100% decelerating

Standards and Approvals

Classification

Class IIb, continuously operating according to EC directive 93/42/EEC

Certification

EN 60601-1:2006/A1:2013, IEC 60601-1-2:2014, ANSI/AAMI ES60601-1:2005/(R)2012, ISO 80601-2-12:2011, CAN/CSA-C22.2 NO. 60601-1:14, EN ISO 5356-1:2015, ISO 80601-2-55:2011

Declaration

The HAMILTON-C6 was developed in accordance with pertinent international standards and FDA guidelines. The ventilator is manufactured within an EN ISO 13485 and EN ISO 9001, Council Directive 93/42/EEC, Annex II, Article 3 certified quality management system. The ventilator meets the Essential Requirements of Council Directive 93/42/EEC, Annex I

Electromagnetic Compatibility

According to IEC 60601-1-2:2014

Safety Class

Class I, Type B applied part (ventilator breathing system, VBS), type BF applied parts CO2 sensor including CO2 module connector, humidifier, Aerogen system, nebulizer, and SpO2 sensor including SpO2 adapter, continuous operation according to IEC 60601-1

Pneumatic Performance

Oxygen Pressure

2.8 to 6 bar / 41 to 87 psi

Oxygen Connector

DISS (CGA 1240) or NIST

Air Supply

Integrated turbine with lifetime warranty

Inspiratory Outlet (To Patient Port)

Connector: ISO 15 mm ID/22 mm OD conical

Expiratory Outlet (From Patient Port)

Connector (on expiratory valve): ISO 15 mm ID/22 mm OD conical

Graphical Patient Data

Intelligent Panel

Dynamic Lung2, Vent Status, ASV Graph3, SMPs (Secondary monitoring parameter)

Waveform

Pressure, Flow, Volume, Off, PCO21, FCO21, Plethysmogram1, Ptrachea, Pes, Ptranspulm

Trend

1, 6, 12, 24, or 72-h trend data for a selected parameter or combination of parameters

Loops

Pressure/Volume, Pressure/Flow, Volume/Flow, Volume/PCO21, Volume/FCO21, Pes/Volume, Ptranspulm/Volume

Additional Details

Power Supply

100 to 240 V AC ±10%, 50/60 Hz

Display Size

17 inch (431.8 mm) diagonal

Display Type

Color TFT

Battery Backup

≥90 minutes with one battery / ≥180 minutes with two batteries

Weight

Monitor 7.8 kg (17.2 lb), with shelf mount: 10.0 kg (22.0 lb), Ventilation unit, shelf mount: 10.5 kg (23.15 lb)

Apnea Backup Type

On, Off

Inspiratory Pressure Limit

0 to 100 cm H2O

Alarms

High: Apnea time (s), Exp ManVel high/low (l/min), Oxygen high/low (%), Pressure high/low (cmH2O), Flow sensor calibration needed, Exhalation obstructed, Disconnection, Oxygen supply failed Medium: Total high/low (b/min), PetCO2 high/low (mmHg), Pressure limitation (cmH2O), Vt high/low (ml), SpO2 high/low, SpOC high/low,%leak, High PEEP, Loss of PEEP, Pulse high/low, Check flow sensor for water Low: High SpO2, Loss of external power, Cuff leak

I:E Ratio

Adult/Ped: 1:9 to 4:1, Neonatal: 1:9 to 4:1

Automatic Expiratory Base Flow

Fixed at 6 L/min

Means of Inspiratory Triggering

Flow trigger control, pressure trigger control, or optional IntelliSync + control

Means of Expiratory Triggering

Flow cycle (ETS), or optional IntelliSync + control

Minimum expiratory time

20% of cycle time; 0.2 to 0.8 s

Oxygen Mixer Accuracy

± (Volume fraction of 2.5% + 2.5% of actual reading)

Preoperational Checks

Tightness test, flow sensor/O2 sensor/CO2 sensor calibration

Features

Independent air supply

Real-time synchronization with IntelliSync+

P/V Tool Pro for lung assessment and recruitment

Transpulmonary pressure measurement

Integrated automatic cuff pressure controller

HIgh Flow Oxygen Therapy

Applications

ICU, Critical Care and Transport